ROOFING GRADE WATERPROOFING- TOTALLY UV STABLE

SPRAYTEC is water-based two component spray-applied system, which cures INSTANTLY to form a seamless, highly elastic, waterproofing membrane.
It consists of a special rubber emulsion and a liquid coagulant. These two components are sprayed simultaneously through separate nozzles so that intimate mixing occurs within the spray, producing an instantaneous solid membrane on the substrate.

SPRAYTEC is principally used in areas where fast curing is essential. For underground situations where there is a high degree of water ingress, SPRAYTEC provides an ideal solution.

Being water based it can be applied onto damp surfaces, whilst its instant curing means that measures to reduce water flow can be kept to a minimum. Examples of such work are underground garages, canals and reservoirs, where extensive pumping is normally necessary to prevent incoming from damaging ordinary waterproofing products.

It can also be used for general tanking work in wet areas such as basement, bathrooms, kitchens and for waterproofing all types of roofs, particularly flat roofs, where its great strength, elasticity and resistance to UV light ensure very long-term durability. For roofing, SPRAYTEC can take the place of high performance torching and other membranes, with a similar 2mm thickness and an aggregate finish if required. It has the added benefits of being seamless and not requiring flame torches or hot-melt adhesive.

SPRAYTEC is highly versatile, and can be used on structures of any shape. The system is suitable for both remedial and new work, and can be applied to the following:
 
*    Built-up roofs
*    Asbestos cement cladding and roof sheets  
*    Metal cladding and roof sheets   
*    Mastic asphalt      
*    Concrete roof decks    
*    Timber roof decks
*    Most types of roof insulation
*    Underground structures
*    Reservoirs and canals etc.     
*    Tunnels and basements

SPECIAL FEATURES

Instant membrane formation…instant waterproofing.
Seamless finish gives absolute water tightness.
Highly Elastic: Elongation in excess of 1000%.
Environmentally Friendly: Cold-applied, non-hazardous, without fumes.
Applied in a SINGLE high-build layer, making it very cost effective.
High UV resistance.
Resistance to both high and low temperatures.
Resistant to puncturing, and self-healing if cut throughout its lifetime.
Good anti-corrosion properties due to its high pH value.
Suitable for use in contact with drinking water.
Excellent slump resistance.
Can be applied onto “green” (i.e. uncured) concrete.

HOW IT WORKS

SPRAYTEC works by a process, in which there is an instant chemical reaction between the coagulant and the emulsion. This reaction causes the water in the emulsion to separate out, leaving solidified rubber. This is known as “breaking”. The excess water remains on the surface until it drains away or evaporates.

Despite this surface water, and its wet appearance, the membrane becomes solid and attains its properties instantly.
When the membrane forms, it has an open textured surface. This gradually closes and becomes smooth over a period of about 3 weeks. This open texture does not effect the properties of the membrane.

Full UK and Europe coverage

We are responsible for the introduction of the system across the whole of Europe and would be only to happy to talk to other companies interested in the system for there own contracts or contractors.  We can supply you with full training on the use of the product, supply of the product in kit form to avoid wastage and offer a comprehensive support service for our accredited contractors.  Intersted? then contact us.